News information

The draft for soliciting comments on the Environmental impact Report of the Optimization and upgrading Technology Renovation project of battery grade nickel sulfate production Line of Guangdong Jinsheng New Energy Co., LTD has been completed. According to the requirements of the Law of the People's Republic of China on Environmental Impact Assessment and the Measures for Public Participation in Environmental Impact Assessment and other relevant laws and regulations, the public participation in the environmental impact assessment of the project is now publicized as follows:

I. Basic information of the construction project

1. Project Name: Battery grade Nickel sulfate Production Line optimization and upgrading Technology Renovation Project.

2. Construction unit: Guangdong Jinsheng New Energy Co., LTD.

3. Construction site: Located in Tuming Tangpo next to National Road 324, Butang Village, Xinqiao Town, Gaoyao District, Zhaoqing City (inside the existing factory of Guangdong Jinsheng New Energy Co., LTD.), covering an area of about 15,667.9 square meters.

4. Total project investment: 170 million Yuan.

5. Construction contents: Technical transformation in the original production line, optimization of raw material structure, upgrading of separation and purification technology, addition of enrichment and separation equipment and environmental protection supporting facilities; After the technical transformation, forming battery grade nickel sulfate 11000t/a, battery grade cobalt sulfate 3800t/a, battery grade manganese sulfate (solid) 2100t/a, lithium sulfate 1350t/a, battery grade lithium carbonate 750t/a, byproduct anhydrous sodium sulfate about 11600t/a, crude graphite powder about 5000t/a.

Ii. Overview of the pollution prevention measures of the construction project and its possible impact on the environment

The technical renovation project is carried out in the existing factory, mainly relying on the existing production workshop. Therefore, the construction period of the technical renovation project does not involve land excavation and other construction. The technical renovation project has a short construction period and only involves the installation and commissioning of equipment. During the construction period, only a small amount of construction waste will be generated, which will be disposed of in the designated site according to the local management requirements. Basically no waste water and waste gas will be generated, and the impact of noise will be small.

2. Operation period

(1) Waste gas: During the project operation period, waste gas mainly includes: acid dissolved waste gas (particulate matter, sulfuric acid fog), extraction waste gas (VOCs, sulfuric acid fog), dry packaging waste gas (particulate matter), boiler waste gas (sulfur dioxide, nitrogen oxide, particulate matter), and a small amount of unorganized waste gas (particulate matter, acid and base gas). Acid solution feeding waste gas is treated by two-stage lye spray, extraction waste gas is treated by two-stage lye spray + dry filter + activated carbon adsorption/desorption +RCO catalytic combustion, dry packaging waste gas is treated by bag dust removal, boiler fuel is natural gas, low nitrogen combustion process and other measures, all kinds of waste gas can be discharged up to the standard.

(5) No organized waste gas: by keeping the production workshop and operation room (room) closed, reasonable design of air supply and exhaust system; Strictly control the reaction conditions, the material in the tank or kettle should be cooled at low temperature before centrifugation and washing; Cooling measures during material storage and feeding to reduce emissions; The loading and unloading process of liquid material transport tank outside the plant reduces the emission of mass breathing exhaust gas; Reduce the emission of waste gas in the process of production, control and transportation; Increase exhaust air volume and capture area; The tank breathing port is connected to the exhaust gas treatment facility; Set up afforestation isolation belt to strengthen afforestation and other measures to reduce the impact of unorganized waste gas. It is predicted that the concentration without organization monitoring can meet the corresponding emission standards and has little impact on the environment.

(2) Waste water: The waste water generated by the project mainly includes condensate water, neutralization waste water, recycling cooling water drainage, pure water concentrated water, cleaning waste water (including the ground, raw material packaging bags, transportation vehicles cleaning),

1.Condensed waterReuse all of them,To make pure water strong waterPartial reuse, partial export,Cleaning waste waterandExhaust gas treatment system drainageAll return to the battery material in one leaching. ② After the neutralization wastewater is treated by oil trap + neutralization + coagulation and flocculation + precipitation + biochemical + filtration + membrane, the discharge outlet of the workshop treatment facility for the first type of pollutants, total nickel, total cobalt, total manganese, total chromium and total cadmium, can meet the discharge standard of production facilities in Table 1 of the Discharge Standard of Inorganic Chemical Industry Pollutants (GB31573-2015). The emission concentrations of total chromium and total cadmium are lower than the detection limits of the standard monitoring method (HJ700-2014). The neutralized sewage after treatment, the initial rainwater collected and precipitated by the initial rainwater tank, the drainage of the circulating water system, and some of the purified water concentrated water discharged from the sewage treatment plant of Xinqiao Town are discharged through the production wastewater discharge outlet. The main pollutants can meet the requirements of the direct discharge standard in Table 1 of the Discharge Standard of Inorganic Chemical Industry Pollutants (GB31573-2015). (3) After being treated by septic tank, domestic sewage meets the tertiary standard of Guangdong Provincial Water Pollutant Discharge Limit (DB44/26-2001) in the second period and the stricter standard of Xinqiao sewage Treatment Plant, and is discharged into Xinqiao sewage treatment Plant for treatment. After treatment, the wastewater discharged from the technical renovation project can be stably discharged into the sewage treatment plant of Xinqiao Town for treatment

(3) Solid waste: waste ton bags, leach slag (tentative), ferro-aluminum slag (tentative), neutralizing slag (tentative), sponge copper, waste reverse osmosis membrane, waste filter cloth and other general industrial solid waste generated during the project operation period are sold and utilized in a comprehensive way; The generated waste activated carbon, waste cloth bags, waste lubricating oil, waste catalyst and other hazardous wastes shall be regularly handed over to qualified units for disposal; The employees' household waste is transferred to the sanitation department for cleaning and disposal, so the solid waste generated by the technological transformation project has little impact on the surrounding environment.

(4) Noise: According to the prediction, the predicted noise values of all plant boundaries of the project during the day and night meet the three standards of the Environmental Noise Emission Standards of Industrial Enterprise Plant Boundaries (GB12348-2008), and the predicted noise values of environmentally sensitive targets within 200m can meet the two standards, with little impact on the surrounding acoustic environment.

(5) Environmental risk projects: the environmental risks are mainly sulfuric acid, which mainly exist in sulfuric acid storage tank, dissolution workshop and extraction workshop. The main environmental risks are storage device leakage and dangerous goods affecting the surrounding areas through ambient air. After relevant prevention and emergency measures are taken, the impact of risk accidents of technological renovation projects on atmospheric environment, surface water environment and groundwater environment is generally under control.

Iii. Environmental impact conclusions presented in the environmental impact statement

Technical reform

Iv. Network link to the public reference form for the draft of the environmental Impact Report and ways and means of consulting the paper report

(1) Web links to the full draft of the Environmental Impact Statement and the public comment form:

Link: https://pan.baidu.com/s/1fZwQqa68OU7p0PJ_Vk6vag
Extraction code:pn6i

(2) The way and way to consult the paper report

The public can visit the following units for inspection:

Guangdong Jinsheng New Energy Co., LTD. (Address: Tuming Tangpo next to National Road 324, Butang Village, Xinqiao Town, Gaoyao District, Zhaoqing City), Contact person: Yin Gong, Tel: 0758-8497483, email: contact@zqjs.cn.

Zhaoqing Environmental Science and Technology Institute Environmental Technology Co., LTD. (Address: Xiangfu Road, Duanzhou District, Zhaoqing City), Contact person: Hu Gong Tel: 15363304164, email: zqhksgs@126.com.

5. Public scope for soliciting opinions

6. Ways and means for the public to express their opinions

The public can put forward their own opinions and suggestions on the construction of the project in the following ways, and try to provide detailed contact information, so as to explain and explain your concerns and opinions.

(1) Fill in the Public Opinion Form for Environmental Impact Assessment of Construction Projects ,
Link:https://pan.baidu.com/s/1fZwQqa68OU7p0PJ_Vk6vag, extract the code: pn6i ;

(2) Make phone calls or send emails to environmental impact assessment units;

(3) Call or send email to the construction unit.

7. The starting and ending time for public comments

Within 10 working days (from April 25, 2022 to May 10, 2022) as of the date of publication of this publicity.
                                                                              Guangdong Jinsheng New Energy Co., LTD

                         April 25, 2022